Instructions

The graining kit is used to replace the grain on leather.

Apply a backing fabric in position, gluing in pace with a solvent based contact adhesive, then apply the base grain filler, put the Teflon paper over the top and use the heat iron to cure the filler.

Once this step is completed apply the grain copier compound, ensuring this is blended off without an edge, then place the grain pad over the top of the grain copier compound, put the Teflon paper on top and heat to cure to leave the grin impression in the material.

‍

Once this is carried out wipe over with alcohol cleaner and colour and seal in the repair.

‍

‍